[MAIN MENU] [ANTI-G VALVES]
|
|
There's strength in Alar's diversity. The sheer nature of Alar's designs lend themselves to a wide variety of pressure and material options. Let's look at just a few of Alar's other products:
 |
|
|
The ALAR SERIES of FILL and CHECK VALVES are used for filling oxygen systems and are tested to hold pressures from 50 PSIG to 2,000 PSIG. |
|
|
The ALAR PNEUMATIC PRESSURE REGULATOR is a low-flow fixed pressure regulator, lightweight and maintenance-free by design and intended for use with inexpensive coarse regulation. |
|
|
The ALR SAFETY INFLATION VALVE (also called the TIRE OVER- PRESSURIZATION VALVE) is used on aircraft tires to vent excess pressure during inflation, then the unit reseats to form a perfect seal. |
|
|
The ALAR POSITIVE ON/OFF FLUID CONTROL VALVE has flow characteristics of 100 LPM and an operating range of 0 to 300 PSIG. Substitution of proper compounds easily allows this design to be used with practically any fluidic matter, especially hydraulics. |
|
|
The ALAR HIGH-PRESSURE OXYGEN REGULATOR is an automatic, altitude compensating (0 to 30,000 feet), continuous flow, multiple person regulator (serving 3 to 15 persons.) |
|
|
The ALAR SHUT-OFF and PRESSURE RELIEF VALVE ASSEMBLY is a toggle actuated, poppet seated, spring loaded, and inlet pressure assisted (for closure) valve for pressures of 0 to 145 PSIG. |
|
That's just a sampling of Alar's product expertise. Everyday, around the world Alar's pneumatic, hydraulic, and instrumentation controls lift off aboard the F-4 Phantom, F-15 eagle, F/A-18 Hornet, AV-8B Harrier, F-14 Tomcat, F-16 Falcon, A-7 Strike Fighter and information-restricted Advanced Tactical Fighters.
Alar's Product lines may change from time to time, but our constant strength exits in the ability to build-to-your specifications or build-to print from one of Alar's own time-proven designs.
Then, when the designs are approved by your organization, our Experimental Department will create a working pilot model for testing and development. Active and efficient prototype production and thorough qualification testing guarantee rapid first article delivery of a component that is ready for economical volume production. And all along the way, our computer integrated manufacturing controls and our strict Quality Assurance Department will make sure that every process conforms to both your standards and ours. |
